1. Usage and parameter
(1) Usage
It's a double pinch profile bending machine, widely used to bending different kinds of profile material.
(2) Parameter
| Specification |
CLW24S-45 |
| Max. Section Modulus |
45cm3 |
| Yielding limited |
σS≤250MPa |
| Angle leg-out |
Max. Cross-section (mm) |
100×100×12 |
| Min. Bending diameter(mm) |
1500 |
| Angle leg-in |
Max. Cross-section (mm) |
100×100×12 |
| Min. Bending diameter(mm) |
1500 |
| Flat-along edge |
Max. Cross-section (mm) |
100×25 |
| Min. Bending diameter(mm) |
1000 |
| Flat-along face |
Max. Cross-section (mm) |
200×30 |
| Min. Bending diameter(mm) |
900 |
| C-section leg out |
Model |
20 |
| Min. Bending diameter(mm) |
1500 |
| C-section leg in |
Model |
20 |
| Min. Bending diameter(mm) |
1300 |
| Bending Speed |
About 2.4 m/min |
| Side rollers speed |
About 1.6m/min |
| Main motor |
Y160M 11KW |
Description:
--Three driven rollers
--bending rolls are high tensile alloyed forget steel, heat treated
--all welded steel frame, heavily proportioned and stress relieved
--digital read outs for the position of the lower rolls
--The three-roll double-pinch type uses one fixed roll and two moveable rolls. Rolls adjust to bend symmetrically or asymmetrically and pre-bend both ends of the work piece in a single pass. Bending distance-the distance between the tangent contact points of the rolls- increases with diameter rolled, broadening the capacity of the machine.
--guide rolls are hydraulic driven and adjustable in up/down
--shafts in alloyed steel, heat treated and grinded, mounted on long life grease lubricated self-alignment spherical roller bearings
--with emergency stop buttons
-- All motors have corresponding breaker to protect for short circuit caused by over electricity
--All motors have corresponding heat relay as protection against overload
Applications:
This machine is widely used in the petroleum, chemical industry, water and electricity ,shipbuilding and machine manufacture and so on .
Functions and Features
this type section bender is used in the volume curved angle steel .channel steel ,I-steel. Flat steel .side steel. Round steel and so on .each kind of profiled bar highly effective processing equipment .and may one time winding circle, corrective ournd working procedure.
Audited Supplier 
){kind=link}
){kind=link}